Enerpac’s New ATM-Series Flange Alignment Tools Offer Improved Safety and Speed

Feb. 6, 2014

Menomonee Falls, WI-February 5, 2014-Enerpac’s latest ATM-Series flange alignment tools offer enhanced safety and efficiency, helping reduce set-up time and installation costs where rotational misalignments and twists in pipeline are common problems. Most importantly, they are an improvement over earlier, alternate methods that could damage bolt holes.

The ATM-2, 4 and 9 Series were designed for use by a single operator, and without the need for an external power source, chains, slings or lifting gear. Perfect for most ANSI, API, BS and DIN flanges, their versatility allows effective use in any position.

The ATM-2 and ATM-4 mechanical models are durable, yet lightweight, self-contained solutions for easy transport to remote locations. Their compact design is ideal for applications with limited access. The ATM-2 has a maximum lifting force of 10 kN, handles bolt holes as small as 16 mm, and weighs 1,6 kg. The ATM-4 can apply 40 kN of force, is designed for bolt holes as small as 24 mm, and weighs 8,6 kg.

The ATM-9 features hydraulic alignment for tougher applications demanding up to 90 kN. With its larger capacity, it is suitable for bolt holes down to 31,5 mm diameter, and weighs 14,5 kg. A kit version includes an Enerpac P-142 two-speed hand pump, and a 1,8 m hydraulic hose.

Suggested for use in oil and gas, mining, energy, construction, infrastructure, manufacturing, process engineering, water and waste water industrial applications.

“Misalignment of flange joints often occurs when pipes are separated for testing, routine maintenance or during shutdowns. The misalignment may also occur during the construction phase, when new pipe is being installed,” says Enerpac.

“Earlier methods of flange manipulation could be hazardous and time-consuming because they required a lot of manual lifting. They could also damage the flange bolt holes. Enerpac’s new alignment tools are safer, easy to use, and can be employed on many popular flange sizes,” says Enerpac, which distributes globally a broad range of professional, non-impact bolting technologies.

Videos of the ATM-Series flange alignment tools can be viewed at: http://www.enerpac.com/en-us/industrial- tools-imperial/mechanical-hydraulic-bolting-tools/joint- assembly-tools/atm-series-flange-alignment-tools

Enerpac is an international market leader in high-pressure hydraulics, with 28 offices in 22 different countries and over 1,000 employees. Enerpac produces thousands of high-pressure hydraulic products that are distributed worldwide. Enerpac focuses on the design of products, from the smallest cylinder to complete computer-operated lifting & positioning systems, which increase productivity and make work safer and easier to perform.

Photo 39297166 © Mike2focus | Dreamstime.com
Photo 140820417 © Susanne Fritzsche | Dreamstime.com
Microplastics that were fragmented from larger plastics are called secondary microplastics; they are known as primary microplastics if they originate from small size produced industrial beads, care products or textile fibers.
Photo 43114609 © Joshua Gagnon | Dreamstime.com
Dreamstime Xxl 43114609