S&L Non-Clog Pump

June 24, 2014

The exclusive design of the S&L Non-Clog Pump lends itself to significant energy efficiency savings for wastewater and stormwater pumping.

S&L Non-Clog Pump design features an oversized, stainless steel pump shaft that minimizes overhang, resulting in significantly less shaft deflection and greater pump efficiencies. Close tolerances are in all cases tighter than NEMA specifications. The impeller is also designed for maximum efficiency. By trimming the impellers inside the shrouds, the S&L pump leaves the back shroud full diameter to prevent stringy material from winding around the shaft.
www.smithandloveless.com

Photo 39297166 © Mike2focus | Dreamstime.com
Photo 140820417 © Susanne Fritzsche | Dreamstime.com
Microplastics that were fragmented from larger plastics are called secondary microplastics; they are known as primary microplastics if they originate from small size produced industrial beads, care products or textile fibers.
Photo 43114609 © Joshua Gagnon | Dreamstime.com
Dreamstime Xxl 43114609