Products

BUFFALO TURBINE
The Buffalo Turbine Monsoon is introducing its new-generation Gyratory Atomizing Nozzle. This nozzle works simply by moving water or other fluid through a screen mesh that surrounds a rotating hub. The hub is driven by the extraordinary air velocity generated by the original Buffalo Turbine Debris Blower high-speed turbine-style fan and can reach speeds of over 5,000 rpm. The solution is forced through the rotating mesh screen, causing a high-speed impact, which pulverizes the fluid into a uniform spectrum of atomized droplets. The tiny droplets, when formed, will mix with the highly turbulent airflow and will project the 30–200-micron particles into the air well over 150 feet to immediately begin collecting and trapping airborne dust particulates and odors, ultimately resulting in an immediate reduction of pollution onsite.
www.buffaloturbine.com

ECONOMIZER USA
The new EXS Extreme Duty Single Shaft Shredder from Economizer provides the versatility needed to handle just about any application need. Available in three models (EXS1500, EXS2000, and EXS3000), and numerous capabilities, the EXS Series offers rugged construction with heavy-duty bearings to handle the toughest material and is suited for large extruder purgings, large reject parts, trim scraps, baled or loose film, synthetic fiber, wood processing scrap, medical waste, cardboard, and paper, as well as carpet.
www.theeconomizer.com

AWTI
Alliance Wireless Technologies has been committed to delivering complete solutions in the communications, security, safety and other related areas since 2001. AWTI provides wireless voice, video, data, safety and control systems solutions and offers the elite product line of 3rd Eye Mobile Vision systems. Designed and manufactured with the highest military specifications in the industry, 3rd Eye Mobile Vision systems are built to 10G for shock and vibration, IP68 for water intrusion, infrared night-vision illuminators, and wide field-of-view angles to enable customers sharp operation in harsh environments under less-than-optimal conditions.
www.awti.net

PETERSON
Peterson’s popular 5900 chipper and 5000H model delimber-debarker-chipper can now be readily adapted to produce uniform chips as short as 0.25 inches and 0.08 inches in thickness. Wood chips need to be a consistent thickness for uniform process control in a digester or dryer. Short fiber length is especially important if the chips will be further reduced in a hammermill. If low bark and ash are a requirement, the Peterson 5000H can achieve less than 1% bark content in many conditions. The Peterson 4800 standalone flail debarker can also be paired with the 5900 disc-chipper for low bark applications.
www.petersoncorp.com

BULK HANDLING SYSTEMS
Bulk Handling Systems (BHS) designs, manufactures, and installs processing systems to efficiently extract recoverable materials from wastestreams, thus minimizing residual volumes sent to landfills and preserving precious natural resources through demonstrated carbon footprint reduction capabilities. The Eugene, OR–based company is the leading supplier of processing systems for the solid waste, recycling, wood products/compost, and waste-to-energy industries and continues to develop new generations of products and systems, while adding to an extensive list of patented technologies.
www.bulkhandlingsystems.com

E-Z PACK
E-Z Pack Manufacturing LLC now offers the new Hercules Automated Side Loader in a CNG option, with additional fuel cells integrated into the body. The onboard CNG fuel cells furnish extra fuel capacity and are in addition to two saddle-mounted fuel tanks attached to the chassis. E-Z Pack now performs all CNG installations in-house at the Cynthiana factory. The integrated onboard tanks are located in a compartment above and behind the hopper, a design created by E-Z Pack engineers in response to a customer request for additional fuel capacity. Total fuel capacity for the CNG unit is equivalent to 60 diesel gallons of fuel, using a total of four fuel cells.
www.ezpacktrucks.com

CPM
Make the most of valuable shipping space by pelleting your waste. A CPM pellet mill helps you maximize each shipment. You can increase bulk density and ship 20% more with less cleanup, greater flowability, and better dust control. The only pellet mill with a gear drive train, a CPM pellet mill is durable, energy efficient, and trouble-free. CPM parts are made and warehoused in the USA to serve the customer faster.
www.cpmroskamp.com

MARREL CORP.
Marrel Corp. is proud to announce the completion of it latest attachment. The skid-mounted water tank can be quickly attached to the truck by using the Ampliroll Hooklift System. While attached, the water tank can be used for dust mitigation, irrigation of roadside vegetation, and light fire suppression. The tank is available in 1,250-, 2,000-, 3,000-, and 4,000-gallon capacities, pumping up to 325 gallons per minute. It can be equipped with 3-inch grooved nozzles, side-spray nozzles, and even a water cannon. All function can be controlled from the drivers’ seat. The best advantage is that when the customer is done with the water tank, another application can be ready within minutes.
www.amplirollusa.com

MORBARK
The Morbark 4600XL Wood Hog offers unmatched performance in its class. It is larger than its previous model, with an increased hammermill size of 14% and a 36-inch tip swing. Standard features include an easy-to-operate Morbark Integrated Control System, or M.I.C.S., which allows the operator to adjust feed systems for increased output while maximizing fuel efficiency. Additional features include a 60-inch infeed opening for processing large bulky material and engine options up to 1,050 horsepower.
www.morbark.com

STELLAR INDUSTRIES
Garner, IA–based Stellar Industries has introduced the Cable75, a 75,000-pound capacity Cable Hoist, at the Waste Expo show in Las Vegas. This is an improved redesign of the SI60 model. Through innovative design, Stellar has decreased the shipping weight, which increases payload up to 1,700 additional pounds. Other features include a 47-degree dump angle, fewer cylinders and seal kits to maintain, improved cable routing, use of stainless steel pins, grease zerks and bushings, and the use of wear strips. All of these features are offered at a competitive price.
www.stellarindustries.com

WEST SALEM MACHINERY
WSM’s Titan Series Horizontal Grinders are specifically designed to process high volumes of diverse types of biomass feedstock, including stumps, land clearing, and urban woodwaste, into high-quality biomass fuel and other valuable finished fiber products. The Titan is a complete grinding system with heavy-duty, multistrand, drag-chain infeed conveyor, large-diameter-powered feedroll, and fully proportional load-sensing feed controller for efficient feeding of material into the grinder. The massive rotor assembly features rigid hammers with reversible/replaceable tips. Modular sizing screens ensure a consistently sized, premium-quality, finished fuel. This stationary electric grinder can be supplied with single or dual electric drive motors for efficient and economical operation, with drive sizes from 400 to 1,500 horsepower.
www.westsalem.com

HORTON INC.
Horton is a major manufacturer of two-speed eddy-current fan-drive products, including the DriveMaster Two-Speed Fan Drive, the DM Advantage Two-Speed Fan Drive, and PolarForce Two-Speed Conversion Kits. These products provide precise, highly efficient temperature control, reduced operating noise, and fuel savings for a number of vocational and commercial applications, including buses, refuse trucks, truck cranes, cement mixers and other on- and off-highway equipment, particularly in applications with relatively little or no ram air.
www.hortonww.com

QED
Flanges on landfill gas and liquid collection systems often require opening for equipment inspection and service. QED’s new Easy Bolts are designed for faster, safer, and less costly access to any flange. The Easy Bolt provides the function of conventional nuts and bolt sets but uses a simple lever action instead of wrenches. Easy Bolt advantages include a fast, no-tool clamp and release action saving field labor time. The fast-and-simple action reduces worker exposure to wellhead conditions that can be safety concerns, such as below-grade gas exposure or insects. Easy Bolts also eliminate the cost, time, and hazards associated with having to saw off galled or corroded nuts and bolts.
www.qedenv.com

UNIVERSAL REFINER
The Universal Refiner R-MAG is a portable woodwaste grinder that can be used in many areas of recycling. It can easily and safely grind lawn clippings, leaves, land-clearing waste, construction-and-demolition waste, logging slash, stumps, logs, yardwaste, railroad ties, storm waste, and tropical (palm and palmetto) waste.
www.universalrefiner.com

NETT TECHNOLOGIES
Located in Mississauga, ON, Canada, Nett Technologies Inc. specializes in emission-control products for engines, vehicles, and machinery used in the material handling, construction, and mining industries. The wide range of products available from Nett includes catalytic converters for diesel, natural gas, LPG, and gasoline engines, diesel particulate filters, selective catalytic reduction (SCR) systems, and fume diluters.
www.nett.ca

TRASH TRUCKS ONLINE
TrashTrucksOnline.com is an online marketplace for buyers and sellers of refuse-hauling equipment, with a tight focus on its core business. Unlike other Web sites that might offer refuse equipment for sale in addition to other trucks and vehicles, Trash Trucks Online’s only business is trash trucks. Buyers can find what they’re looking for quickly, and sellers can be confident that their offerings won’t get lost in a crowd of dump trucks, semis, and other kinds of equipment. The company’s tight focus, easy search process, and up-to-date inventory have all been key factors in its growth and success over the last three years.
www.trashtrucksonline.com

AIR-WEIGH
Air-Weigh now offers a new onboard scale designed for vocational vehicles equipped with the Mack Camelback drive suspension. The scale incorporates Air-Weigh’s patented technology, which provides accurate weight measurement on steer and drive axles. All Air-Weigh scales display critical axle and GVW weight information, offer user programmable warning and overweight alarm outputs, provide pin-protected calibration, and provide multiple digital interfaces.
www.air-weighscales.com

GEOLOGIC COMPUTER SYSTEMS
GeoLogic serves the waste industry with GPS systems designed to monitor density in real time from the compactor. Fully capable of doing survey and rapid topo mapping, Geologic systems can also control dozers, scrapers and graders according to plan, while updating engineering files with new as-built data. These systems have been used in the construction and waste industries since 1994 and have proved to increase density in the landfill from 4% to 15%. Using these systems saves airspace, fuel, and resources. GeoLogic provides the best accuracy available.
www.GCS3D.com

HEIL ENVIRONMENTAL
The MultiTask SL drop-frame side loader is available in manual, semiautomated and automated versions. It features the industry’s largest hopper capacity, a 6-inch tapered body for easier load discharge, and twin dump-hoist cylinders for improved stability. The new TeleGrip telescopic automated arm provides 88 inches of reach and stows compactly at the chassis frame rail. Overall maximum vehicle width is less than 102 inches with lift-down and grabbers ready.
www.heil.com